[seanp2k2]

I agree; it's like all the rollaway accidents that happen now because of electronic shifters: https://www.safetyresearch.net/the-persistence-of-rollaway/

Design matters, and bad designs can literally be deadly. Why auto mfgs feel the need to "innovate" with shifter designs is beyond me. The worst part is how every mfg seems to be implementing a different design of bad electronic shifters, from wheels and touchscreens to one-click-at-a-time joysticks to single-function pushbuttons for some gears with others on a scroll wheel. They've taken something and made it worse with no benefit to the user. At least with those auto-flushing toilets, the intention was good, even if the implementation is still somehow so awful decades later.

[aidenn0]

I drove a rental with a rotary-dial shifter. That is the single most braindead UX thing I've seen in a car that doesn't involve a touch-screen. We've had PRND(L) levers as the standard for shifting in automatics for over 50 years now, and the dial offers no advantages that I can see.

[elzbardico]

Probably it is a few dolars cheaper. Not enough to change the bottom line, but as always, any short term cost cutting is enough to give brain-dead Harvard MBAs multiple orgasms.

[aidenn0]

Dollars? I've worked with car manufacturers and they would sell their soul to save pennies. OTOH they tend to be very conservative with anything that actually impacts the driving part of the car.

[derekp7]

My Ford Fusion has one of those rotary dials. Didn't like it at first, but it is nice having that air space free (not able to accidentally knock it out of gear, more room for an extra cup holder). Also the cars with a physical gear shift lever still work by activating switches, there hasn't been mechanical linkage for years in a lot of models.

[phkahler]

>> We've had PRND(L) levers as the standard for shifting in automatics for over 50 years now, and the dial offers no advantages that I can see.

My guess is that the dial costs less, so it is done for the company not the customer. Many cases of bad design come from prioritizing the manufacturer over the customer.

[selimthegrim]

Pray tell what make and model this was so I can run as fast as my legs can take me in the opposite direction if Hertz tries to palm one off on me

[devilbunny]

I rented a Ford Edge two months ago that had one. It was quite distracting. At the end of a week, I still hadn't internalized how it worked. I had to think about it every time.

On my old Chevrolet Tahoe, I can tell what gear I just shifted into by feel (shifting into D, it has a slight tendency to overshoot the normal overdrive mode and end up locked into 3rd). And of course, this is essentially a nonissue on manual transmissions.

[aidenn0]

Most cars have a stop at D; e.g. for the ones where you pull the stem towards to to leave park, you can let the stem spring back at neutral and push it down until it stops at D, and for the ones with a button you can release the button at neutral.

[edit]

Honestly if the rotary dial had similar tactile feedback, it would probably be fine. No worse than when they moved it off of the tree as bench seats were retired for safety reasons.

[devilbunny]

Like I said - it has such a stop, it's just old and a bit worn.

It's column shift despite bucket seats.

[betwixthewires]

It's not just auto manufacturers. It seems literally everything is being designed with a philosophy of "fuck the user" in mind. I cannot think of a single thing more complicated than a concrete block that functions better now than previous versions did 10 years ago, and I'm sure there are some things that work at least as good, but I can't think of any off the top of my head.

[phkahler]

>> I cannot think of a single thing more complicated than a concrete block that functions better now than previous versions did 10 years ago...

I've got news for you. My uncle worked in construction most his life. He told me the concrete isn't as good today as it used to be. He said in some places for shipping they "blow it around". Meaning you don't put it on a ship using a conveyor, you do something similar to blowing dust through a pipe? I never asked for more detail. He thought the handling was exposing it to humidity or in some way degrading the concrete. This would be another case of prioritizing cost/efficiency over the customer.

So even your humble concrete block might not be as good as they used to make em'

[SAI_Peregrinus]

Quite a lot of electronics test & measurement equipment. Notably modern spectrum analyzers & network analyzers. Also modern arbitrary waveform generators & RF generators are vastly better than a decade ago. Other bits haven't improved nearly as much, eg the HP 3458A is still one of the best meters in the world. The Fluke 5720A Calibrator is likewise an old workhorse.

[betwixthewires]

I forgot about engineering hardware. I've used some of that stuff, lots of it is good but tons of it is vendor lock in stuff as well, NI comes to mind.

[ClumsyPilot]

My building had a dialing system replaced with one that uses a phone line to call a mobile of each resident. It can also only assing one number. Now I get the call at work if my wife orders pizza, or if i am out of the country.

It also doesnt work at all if i am in tube, or when my building forgets to pay phone bill, or movike network craps out

[betwixthewires]

I'm glad to say I don't have any shit like this that I have to deal with. I've got a phone and a laptop and that's it. My car basically has a fuel controller and ABS controller in it. Aftermarket MP3 playing head unit with an aux jack.

Whatever benefits the tech firms and salespeople sold you (not literally you, anyone reading) on all this shit, if you have this stuff in your life I guarantee you your life is more stressful than mine because of it.

I'm to the point where I only buy used stuff period. Basically food and underwear have to be new. I don't think I've bought a brand new anything in over 5 years. I don't know if I ever will if this trend continues, proprietary single serve coffee pouches, internet connected stovetops, TVs that show ads separate from the broadcast, cars that track your movements and sell them to data brokers, touch screen everything, how many screens does a single person need?

[indigo945]

But in ten years, all the used stuff will also be fully-electronic vendor-locked garbage, just older and with the cloud services down, and hence unusable.

[can16358p]

I think it's more like as things get more complex, there are many more edge cases to check and most are very unlikely to happen statistically/practically so manufacturers don't put enough thinkin/design effort in those "details".

Until, of course, it does.

[betwixthewires]

I don't buy it.

They're literally engineering shit people don't need now. In virtually every product. And doing UI redesigns on things that change the user friendly UX, often breaking it.

I remember looking forward to browser updates, OS updates, the next generation hardware whatever. Things used to actually get better. I actually got a new phone the other day with a newer android version, never mind that there's a fucking hole in the screen, when I changed my screen brightness there was a deliberate animated delay to the brightness changing with the slider. Seriously, who the fuck is making decisions like this?

90% of things don't need to get more complex. A touch screen on a fridge, speakers in your car that get louder as you accelerate, Bluetooth speakers that need software updates, these are not improvements to the products in any real way whatsoever.

[zerocount]

I agree. My theory is that this is all 'busy' work. For some reason or another, there's just nothing else for the employees to do.