[yarcob]

I've never worked with bamboo plywood, but the product on the website looks like it should be compared with 20mm 3 ply wood panels made from cut hard wood instead of the cheap ply wood made from peeled wood.

So a better comparison would be something like [1], which is a lot more expensive than standard birch plywood.

[1]: https://www.arbeitsplatten-shop.de/epages/61566463.sf/de_DE/...

[lostapathy]

Baltic birch isn’t cheap plywood - it’s good stuff.

[yarcob]

I'm not saying it's bad, I've used birch plywood myself and I like it.

But you can't compare the 13 layer plywood made from peeled wood with the stuff made from 3 layers of sawed wood. They are completely different types of product, and the cost is also very different.

Apart from mechanical properties, the 3 layer stuff is also much nicer optically usually (eg. they use camera sorted boards to achieve nice and even patterns). That's why it is more expensive.

[lostapathy]

Birch plywood and baltic birch plywood are completely different animals.

Regular birch plywood is indeed often the cheap stuff.

Baltic birch will be void-free and of a very consistent quality and made from thinner veneers. It's much more stable and high quality product, although you're correct that it probably won't be as pretty on the surfaces.

[yarcob]

Too be honest I've never heard of "baltic birch" before so I can't comment on how different it is from the normal birch plywood we get here in EU.

I just googled it and saw that it looks exactly like the birch plywood I have been using, so I assumed that it has similar properties.

I consider birch to be "good" plywood, it's very easy to work with, strong, and seems somewhat resilient to warping. However, because the layers are so thin you often end up breaking bits off when working on it with a router, and the surface somehow doesn't get as smooth when sanding.

The 3-layer boards (not sure what they are called in English) seem to be easier to sand smooth, easier to finish with oil, and are not as finicky when routing.

Just from looking at pictures, I'd assume the bamboo boards are closer to the 3 layer stuff rather than the 13 layer stuff.