Hacker News new | ask | show | jobs
by Matt3o12_ 1845 days ago
The heatsink doesn't really work, though, and is marketing for the most part [1].

I have a crucial P1 NVME SSD and I can make it overheat pretty reliably. Pretty much any synthetic workload makes it overload if the SSD is empty (it reaches 70° pretty quickly and even starts throttling until it reaches 80° and the whole system starts shuttering because of extreme throttling do it doesn't damage itself. Although I have not properly tested it, it seems that not using any heatsinks from my motherboard makes the temps actually better but it still overheats.

The main reason it can overheat quickly is probably because its sitting in a really bad position where it gets close to zero airflow despite being in an airflow focused case. Most motherboards place the nvme slot directly under the GPU. The main problem seems to be that the controller is overheating when it's writing at close to 2000 MB/s. It's also important to note that only the controller (an actual relatively powerful ARM processor), not the flash memory, seems to overheat.

Fortunately, this is mostly not an issue because it's a QLC drive and the workload is unrealistic in the real world. When writing to an empty drive at 2000MB/s (Queue depth 4, 128k sequential writes), it takes 2 minutes until the cache is full. The way its currently used, it takes 30 secs for the cache to become full and for write speeds to drop to 150MB/s. The only way it has every overheated in the real world was during the loading screen of a gameplay when it reached 78C quickly (and I only noticed it in the hardware monitor). If the GPU hadn't heated up the nvme drive before (it was sitting at 65C mostly idle), and starved it for air, I doubt it would have hit 60C.

So until motherboards start placing nvme where it can get some actual cooling, or they make actual functioning heatsinks, their power usage can make a difference.

[1]: https://www.gamersnexus.net/guides/2781-msi-m2-heat-shield-i... but there are many more articles/forum posts with similar issues.

1 comments

The Crucial P1 is a budget SSD that doesn't come with a proper heatsink, similar in quality to that god awful "heat shield" in that linked review. When I say "High performance m.2 drives come with removable finned heatsinks" I mean an actual high performance drives that come with a finned heatsinks like https://www.amazon.com/Corsair-Force-MP600-Gen4-PCIe/dp/B07S... not examples of budget drives paired with flat pieces of metal.

Also your high performance SSD should be going in the direct-to-CPU slot to the right of the GPU, not under it.