Hacker News new | ask | show | jobs
by murderfs 1944 days ago
If you're using stencils (and as long as your boards are relatively small, there's almost no reason not to with how cheap they are from jlcpcb/oshstencils), I highly recommend buying a jar of Loctite GC-10: it's the best solder paste I've ever used, and it lasts forever. I have a jar that expired 2 years ago and is still great.

Also, the T-962 reflow oven is pretty good for its price, with a bit of modding (flashing open source firmware (https://github.com/UnifiedEngineering/T-962-improvements), removing masking tape that melts and stinks, and adding a thermocouple for cold junction compensation).
1 comments
amelius 1944 days ago
Did you try SAC-305 solder pastes from different brands?

I'm quite happy with my current SAC-305 solder paste from ChipQuik, but curious if I could find an ever better one.

link
murderfs 1944 days ago
Checking my fridge drawer: I've used leaded mechanic paste, and SAC-305 mechanic, SRA, and MG chemicals (plus chipquik low temperature bismuth paste, but it was terrible: I had parts literally falling off the board).

They're all significantly worse for stenciling than GC-10. If you're manually applying paste with a syringe, you might be better off with other paste, because it's significantly thicker than the usual pastes I've tried, but I usually just hand solder instead of waiting an hour for refrigerated paste to be better.

When this tub of GC-10 actually has any symptoms of being expired, I'm definitely going to buy another (or maybe GC-18, which seems to be the new shiny version? I don't see any ebay listings for cheap almost-expired GC-18, sadly.)

link