[iddqd]

I agree. I have run quite a few Raspberry Pi over the years and so many of them died because of SD card corruption. Eventually I got a NanoPC T4 with built in eMMC and it’s been tugging along for a good 2 years with zero issues.

[bitwize]

I've never experienced this SD card corruption, even when power goes down to the Pi. I believe it happens, but I wonder what my unique circumstances are. Is it that I always use Samsung or SanDisk SD cards with the Pi?

[CharlesW]

> Is it that I always use Samsung or SanDisk SD cards with the Pi?

Quite possibly! Flash memory is absolutely not all the same. I wish someone would do for SD cards what Backblaze does for hard drives.

[cptskippy]

> Is it that I always use Samsung or SanDisk SD cards with the Pi?

Oddly enough, Samsung, SanDisk, and Sony are the three brands I've had die on me. I had a GoPro eat two Sony cards in less than a year, I switched to SanDisk Endurance and it's been plugging along for about 2 years now. I've had one Samsung and a couple SanDisk SD cards die in Raspberry Pi's. I'm currently using MicroCenter, AData and one other lower tier brand that have held up much better than the name brands.

[shiftpgdn]

Those will still eventually die due to log being written to the card using all available read/write cycles.

[puzzlingcaptcha]

You mean /var/log or filesystem log? What about using non-journaling filesystems or keeping /var/log on a ramdisk?

[bitwize]

That's a problem that will eventually affect any flash solution -- SD card, SSD, or USB flash.

[megous]

They usually just stop accepting writes (silently). It's a bit of a head scratcher at first. But at least it doesn't lead to a complete data loss.

[ekianjo]

> I have run quite a few Raspberry Pi over the years and so many of them died because of SD card corruption

The Pi themselves don't die because of a SD corruption. Only the SD cards do (and they can be recovered).

[hohloma]

I've had a raspberry with SD card for more than 3 years now, still working fine. YMMV obviously

[wjdp]

Had similar and switched to a cheap used desktop. I was running Home Assistant [1] and my guess is the constant writing of state history into the database slowly killed the card.

[1]: https://www.home-assistant.io/