[heintje_ghulam]

It doesn't eliminate the spoiler effect. Here's a simple example of what can happen under RCV:

Pretend Bernie Sanders in 2016 ran under the Green Party after dropping out of the Democratic Primary. RCV claims to eliminate the spoiler effect, so it is "safe" for all the people who want Bernie as their first choice to actually express that. Assume everyone who likes Bernie the best follows that: they put Bernie as their first choice and either Trump or Clinton as their second choice. Presumably more will have Clinton as their second choice than Trump since Clinton is more centrist than Trump who is on the right.

Say the "first choice" votes go as follows:

- 45% top choice Trump

- 35% top choice Bernie

- 20% top choice Hillary

Hillary gets eliminated and the people who put Hillary as their first choice now have their second choices distributed among the remaining candidates. Say that split goes (within the 20%):

- 6% 2nd choice Trump

- 14% 2nd choice Bernie

Trump wins, even if all the Bernie voters had Hillary as their 2nd choice, because their second choices didn't count for anything. So the claim that it was "safe" to express their true preferences and put Bernie as their first choice completely backfired.

summary: among three choices, under Ranked Choice Voting, you only get your votes moved to your 2nd choice in Ranked Choice if you do not come in 2nd place overall. If your candidate comes in 2nd, your votes are worthless.

A system that fixes this and other issues is STAR Voting, and it's what people should be pushing for:

https://www.equal.vote/

https://www.starvoting.us/

[grifball]

I watched the video at your link, but it wasn't very descriptive as to how the votes are actually tallied.

This video does a good job of explaining RCV:

https://www.youtube.com/watch?v=3Y3jE3B8HsE

Is there a similar video for STAR?

I can see the problem with RCV now. It doesn't completely eliminate the spoiler effect, just makes it less likely.

I understand how votes are cast in each system and they seem similar. STAR seems like RCV, but you can put multiple candidates in the same rank. I'm not sure how STAR votes are tallied, but wouldn't you be able to implement that same system with RCV? The only difference is same-ranking candidates. Is that the key to STAR's improvement?

EDIT:

Is it just this simple? You sum their score, then instant runoff the top 2?:

https://www.youtube.com/watch?v=NuVSn2rAFVU

I can't tell if it's better or not yet. It still definitely doesn't elect the condorcet winner... which you can see from 3 voters and 12 candidates:

Voter 1: 4 for A, 3 for B, 2 for C, 1 for J

Voter 2: 4 for D, 3 for E, 2 for F, 1 for J

Voter 3: 4 for G, 3 for H, 2 for I, 1 for J

It's more contrived than the example for RCV, so I think it's more resistant to spoiler effect, but it clearly happens here. Essentially, every favored candidate higher than 1 is different and they all have the same candidate for their last favorite candidate. As you can see, A,D,G have the most votes, but in 1-on-1 face-offs, J would win most of the elections. Voter 1 likes J more than D,E,F,G,H, and I. Voter 2 like J more than 6 other candidates as well and same with Voter 3. But in STAR, he gets eliminated.

I believe you could come up with an example where the top two candidates aren't tied, but it would be more complicated.

These voting systems are difficult to measure. I thought RCV was very secure until this HN thread. Hopefully STAR holds up, but I think you'd have to look more into the incentives to fully know if it eliminates the spoiler effect.

[smichel17]

> Is it just this simple? You sum their score, then instant runoff the top 2?

Yes. First round counts stars, second round just counts preference.

If I remember correctly, the main purpose of the second round is to discourage strategic voting -- if you give all other candidates the minimum score, to give your favorite the best chance, then you don't get to express a preference in the runoff, in the event that your favorite is not top 2. So it's only worth doing this if you really like your favorite so much that everyone else is the same to you.

> It still definitely doesn't elect the condorcet winner... which you can see from 3 voters and 12 candidates

My understanding (from Wikipedia) is that the condorcet winner is "one candidate who beats every other candidate pairwise". Since often no candidate fulfills this criteria, all condorcet systems that expect to survive contact with the real world need to specify a fallback way to choose a winner. I don't know much about the different strategies they use to do this.

If my understanding is correct, then it seems like there is no condorcet winner in this scenario (rather, a 3-way tie). So I'm not sure how you expect a condorcet system to handle it.

[grifball]

Edit to my previous comment: there are 10 candidates, not 12

I'm new to these terms, but when I look up "condorcet winner" in on wikipedia, it's defined as: "the candidate that wins a majority of the vote in every head-to-head election"

So, I'm assuming "every head-to-head election" would be 10 factorial elections in our case (one for each pair).

Let's look at a couple of these elections and then extrapolate on the rest of them:

J vs A:

Voters 2 and 3 didn't put A on the list, while they did indicate that they liked J, so they would vote for J. Only Voter 1 would vote for A.

D vs A:

Again, two voters didn't put D on the list (1 & 3), but did indicate that they liked J, while only one voter (voter 2) likes D over A.

You can see that, for each candidate besides J, only one voters like them, while all voters at least like J a little. This means that J will win "every head-to-head election" and thus be the condorcet winner.

The only problem with this proof currently is that STAR doesn't explicitly elect a winner, so therefore it is not "choosing the wrong winner" as it isn't choosing any candidate. It is eliminating the condorcet winner though, which is concerning, and I believe a more complicated example would show STAR choosing a non-condorcet winner.

I like STAR more than RCV after reading up on STAR more. I believe that approval voting might be better though, as it completely elimintates the spoiler effect I believe. Though it may have other problems.

Thinking about this more, I believe a condorcet winner can be chosen with RCV (and STAR with some assumptions) just by changing the tallying system. I was able to dicern from my example who the condorcet winner was, so why not do the same in an election? Just simulate all head-to-head elections to find the condorcet winner. I must be missing something.

Here's a scenario where STAR elects a candidate that is not the condorcet winner:

  Voter 1:
    5 for B !
    4 for C
    3 for D
    2 for E
    1 for A !
  Voter 2: 
    5 for G !
    4 for H
    3 for I
    2 for J
    1 for A !
  Voter 3: 
    5 for L
    4 for M
    3 for N
    2 for A !
    1 for B !
  Voter 4: 
    5 for Q
    4 for B !
    3 for S
    2 for T
    1 for A !
  Voter 5: 
    5 for V
    4 for W
    3 for G !
    2 for Y
    1 for A !

I've marked important votes with a '!'. All others are unique votes for candidates with no support.

In this scenario, B and G get the top two scores with 9 and 8. B wins the election with 3 votes (voters 1, 3, and 4) over G's two votes (voters 2 and 5). A is the condorcet winner though as they win every head-to-head contest (with close elections (3-to-2), against B and G). A was eliminated though, as they only scored 6 points.

This was complicated and too much fun to write, so it probably isn't practical in a real world scenario.

[smichel17]

Ah! I had a total brain fart and was still scoring the ballots like STAR — "in an election between A and J, A has 4 points and J has 3". -.-

> a condorcet winner can be chosen

A condorcet winner doesn't exist, if there is a circular relationship:

    Voter 1: A > B > C
    Voter 2: B > C > A
    Voter 3: C > A > B

Yes, there are cases when STAR does not elect the condorcet winner. Of course, you could always add condorcet on top, and use STAR as the fallback. But you can do that for any system — basically all of which fail to elect the condorcet winner in some edge case — so it's not a particularly interesting insight. It's more about tradeoffs and what scenarios are most likely.

Note that Approval voting is also a form of score voting — with a range of 0-1. The drawback here is limited expression — I can't say that I love or hate a candidate, and so it can elect a candidate with broad, weak approval and some strong opposition, over a candidate with broad, weak disapproval and some strong support. For example, let's draw the "I approve" line between 2 and 3 stars (approval indicated with +/-):

    Voter 1:
      5 for A (+)
      3 for B (+)
    Voter 2:
      5 for A (+)
      3 for B (+)
    Voter 3:
      3 for B (+)
      2 for A (-)
    Voter 4:
      2 for A (-)
      1 for B (-)
    Voter 5:
      2 for A (-)
      1 for B (-)

A is preferred by 4 out of 5 voters and 16 vs 11 stars, but B wins with 3 approvals, to A's 2.

This is not a terrible failure mode — electing a mediocre, likely moderate, candidate over a decent one — considering it is the worst-case scenario for approval voting. Compare to the worst case scenario for FPTP, where sufficiently many candidates representing the most popular viewpoints split the vote, giving the win to a universally disliked, radical candidate. Of course, in actual elections we (the electorate) avoid this scenario by favorite betrayal, which has its own obvious shortcomings. To fix the Approval voting failure mode, scenario, we just have to be more stringent with our votes (ie, raise our standards).

Note how we were able to use the STAR ballot to derive what the outcome would have been in Approval. If we only had access to the Approval ballot, we couldn't tell that it was electing an inferior candidate. If the goal of the election is to choose the candidate who best reflects the preferences of the electorate, Approval is leaving information about those preferences on the table (edit: as is condorcet!). Aside: I remember reading (maybe on https://rangevoting.net ?) that increasing the range past about 7 sees quickly diminishing returns on this front.

STAR is more expressive, at the price of (mostly) complexity. edit: forgot to add that, while score voting is about the best you can do in terms of preferences among candidates, support of a candidate doesn't capture the full picture, either, since it bundles all the issues you may care about into a single decision (but putting that on the ballot moves us towards a different system of government).

At the end of the day, any form of score voting would be a MASSIVE improvement over the status quo. I would wholeheartedly support any of Approval, STAR, or vanilla score voting (on the same 5-point scale / STAR minus the runoff). I think we should put our efforts behind whichever one is most politically viable. STAR actually has a chance of being implemented (in Eugene, Oregon — see https://www.starvoting.us/campaigns); not sure where Approval stands.

[grifball]

>At the end of the day, any form of score voting would be a MASSIVE improvement over the status quo

Yeah, I think we're both of one mind. I just find the math (or logic) behind these voting methods interesting. And it is somewhat important.

>Yes, there are cases when STAR does not elect the condorcet winner. Of course, you could always add condorcet on top, and use STAR as the fallback. But you can do that for any system — basically all of which fail to elect the condorcet winner in some edge case — so it's not a particularly interesting insight

I think the interesting part of my work in these threads is that the non-condorcet winner example for RCV is much easier to produce than the non-condorcet winner example for STAR. The RCV version only takes 3 candidates, while the STAR version takes ~25 candidates. While this could be a failure of our ability to find scenarios where the non-condorcet winner is elected, I believe it says more about how resistant these systems are to the spoiler effect, which, in essence, is where a non-condorcet winner is elected.

I really like the idea of overlaying STAR and approval voting to show that STAR's expressiveness makes a big difference and I think your example is pretty realistic overall. But I have some issue with it as well. I made an assumption about voters in my example that you didn't make, which is that voters will try to impart their own will as much as possible. This means always using the 5 star vote in the STAR method. I thought this was a sane assumption to make about voters and that only using the 4 slot (never bubbling in 5 star) would be irrational. I think I could make a much less complicated example if I dropped this assumption. Also, I kinda feel uneasy about the cut off, but I'm not sure how to improve it. I just imagine that if a voter had any slight preference of one candidate over another, they would indicate that in the approval method.

>Approval is leaving information about those preferences on the table (edit: as is condorcet!).

How would a condorcet election leave out expressiveness? I think expressiveness is subjective and hard to define. I might've simplified analysis of these schemes by assuming that a condorcet winner system had the ultimate expressiveness (assuming there is a condorcet winner).

>A condorcet winner doesn't exist, if there is a circular relationship:

I meant a condorcet winner will be elected if it exists.

I think the biggest problem with STAR voting is that these stars are kinda hard to reason with. What exactly does it mean if I give a candidate 4 or 5 stars? What affect will that have on the election? RCV might be more complicated, I'm not sure, but it's a lot easier to understand as it's easier to rank your favorite candidates. This really comes down to preference though and it's where I kinda checkout because it can lead to some really tedious arguments. They're all good. It would be great to see STAR in action in Eugene!

[smichel17]

Assorted thoughts, with no particular relationship or broader point:

> the STAR version takes ~25 candidates

I was just poking around on the star voting site, and "More than 5 candidates" was one of the criteria for whether there should be a primary or a single election.

> I just imagine that if a voter had any slight preference of one candidate over another, they would indicate that in the approval method.

Well, depending on the number of candidates, this isn't always possible — If there are 4 candidates who you love, like, dislike, and hate respectively, you don't have a way to express the difference between love/like and dislike/hate.

> I made an assumption about voters in my example that you didn't make, which is that voters will try to impart their own will as much as possible. This means always using the 5 star vote in the STAR method.

There's research here that considers both honest and strategic voting: https://electionscience.github.io/vse-sim/VSE/

I don't know if it considers that someone might always vote 5 stars for their favorite candidate, but thinking about that, I agree it is probably likely. It would not make much sense to cast an approval voting ballot and vote against, or for, all candidates. Might as well not vote, at that point :P

> How would a condorcet election leave out expressiveness?

N voters rank A=5, B=1, C=1.

N+1 voters rank A=4, B=5, C=1.

B is the condorcet winner, but I think it's clear that A is the best choice. This a failure mode of STAR voting as well, which elects B, while vanilla score voting (and approval voting) would elect A.

> What exactly does it mean if I give a candidate 4 or 5 stars?

I like to work up from FPTP (if I'm talking to someone who's not into this, I'd just call it "our current system" or "single choice"):

- In our current system, you vote for one person. Count the votes, and whoever has the most, wins.

- In Approval voting, you vote for as many people as you want — anyone you'd be okay with. Count the votes, and whoever has the most, wins.

- STAR voting works like Approval voting, but instead of a yes or no, you rank the candidates with 0-5 stars, like Yelp/Amazon reviews. Add up the stars, and whoever has the most, wins.

At this point, I make a choice about whether to mention the runoff, because it is hard to explain with words alone. If the person I'm talking to is interested, intellectual, or if I have access to a computer where I can show them this picture[1] on https://www.starvoting.us/star, then I'll go ahead and mention the runoff. Otherwise, it causes too much confusion.

[1]: https://d3n8a8pro7vhmx.cloudfront.net/unifiedprimary/pages/2...

[ElijahLynn]

This post seems logical and takes time to explain the thinking with examples. I don't think it should be down voted (it is grey right now).

I have learned about STAR recently here https://www.wired.com/story/dana-debeauvoir-texas-county-cle... (A Texas County Clerk’s Bold Crusade to Transform How We Vote) and it is a legit system and has real promise.

[Buttons840]

Since you replied to me: I agree, STAR would be better. I also like approval voting for its simplicity. I believe both are better than RCV, but for whatever reason RCV seems to have the hype and I'm not sure whether it's better to try to run with that hype or redirect it towards STAR or approval voting.

[alextheparrot]

The second vote was still counted, though. It just happened that Bernie had 49% (35 + 14) of the vote vs Trump's 51% (45 + 6) in this example? Just because I don't like the hypothetical results of the vote doesn't mean it is wrong.

[heintje_ghulam]

The point I was trying to make is that the system doesn't fully reflect peoples' full set of preferences, it chooses some voters' and takes their second choices into account while ignoring others.

[alextheparrot]

Can you help me validate this assumption I've formed based on what you said: The only time this seems to be impactful is when you rank two candidates with the same preference [0].

It seems that otherwise this just creates a roughly equivalent ranking structure. I think that's interesting in a system with many candidates or very similar ideologies, but in this example I would probably expect the same result.

Edit:

[0] After reading more, I now realize that the initial selection is also the sum of preference votes, so someone could rank Bernie 5, Hillary 4, Trump 0 which could create changes in who the run-off candidates are.

[lhopki01]

Surely in your example STAR Voting would have had the same result?

Hilary (and all other lesser candidates of which there are none) get eliminated leaving Bernie and Trump. Then preferences of Hilary voters for those two are calculated (Preference for a runoff between Bernie and Trump are already determined) so you end up with the exact same result.

[heintje_ghulam]

You're assuming the scores were chosen from e.g. 1,2,3, and people gave their first preference 1, second preference 2, and third preference 3. So yes, if you force everyone to rank the candidates like in Ranked Choice Voting, in this case you get the same outcome as Ranked Choice Voting. STAR doesn't restrict people to strict ranking though.

[lhopki01]

The only situation where what you say is true is if enough of Hilary's supporters give both Bernie and Trump the same preference number. This is reflected in RCV by not putting a second and third choice. Remember that only the first round takes into account scoring. Runoff only uses relative preference which works out the same as RCV.

Also it took me way too long to understand this which makes this seem to me to be a bad system. I've never struggled to understand how a voting system works before and I've used, STV, MMPR, PR, RCV, and FPT.

I honestly think proportional representation in a Parliamentary system is way better than any of these complicated system. It's simple to understand, I vote for who I want, and it doesn't end up with the stupid situation of an Executive who can't command support of a Legislative.