In films at least, Geiger counters do a peep constantly when turned on. Could a geiger counter fall silently and be mistaken for absence of radiation? Aren't equiped with visual clues also? (lights blinking... etc)
A) If it can not see beta and gamma radiation it is completely broken. You should test that before you use the Geiger counter. It is neutrons and to some extend alpha radiation that you might be blind to.
B) Of course there is batteries in there. But if they are dead, the Geiger counter would be completely dead and not even detect the natural background. You should notice that before you actually use the device.
C) You had one job...
D) that's the problem with invisible dangers and why we have fixed procedures to follow.
A simple Geiger counter give a current pulse when a bit of ionizing radiation makes the tube conductive and then has an external circuit switch of the supply voltage to extinguish the current in the tube. During that dead time it is unable to detect radiation. After a set time the tube is powered up again. Some models would detect if there is too much current flowing and would switch of the voltage again. This current flow could happen for two reasons: it is _STILL_ flowing from the first event or it is _AGAIN_ flowing because there is too much radiation. So depending on models it might simply stay completely silent when there is a lot of radiation (failing silently when it should really warn you) or it could detect that simulation and raise an alarm (possibly giving a false positive if the tube ages and the current takes a long time to shut down after an ionization even in the tube). It is important to know which of the two the model in your hand does.
Source: Radiation Safety training more than a decade ago when studying physics.
In films at least, Geiger counters do a peep constantly when turned on. Could a geiger counter fall silently and be mistaken for absence of radiation? Aren't equiped with visual clues also? (lights blinking... etc)