[arielweisberg]

Another satisfied Zenni customer. The lenses are not always perfect and the frames are not always the best. Sizing is hit or miss.

What I do is buy the frame with cheap lenses to check fit, then I buy it with nice lenses if I like it. They are so cheap there is no reason not to do it this way.

Even ordering multiples it ends up being inexpensive.

[briffle]

I want to like Zenni, and I have ordered from them, but I am frustrated every time. I have a very, very large head. I need glasses at least 155mm wide, if not 165mm wide to fit around my temples. Yet finding data on the width of their frames is next to impossible. Even their sales people I reach via chat do not have the data. Sometimes I will see frames with some measurements, but not all, and its just inconsistent. I basically gave up, and buy from 'fatheadz' that specialize in wider frames, but they are much more expensive. For an internet only company, they sure seem to limit how you can search.

[mikekchar]

I just wanted to chime in here because while I don't have a wide head, I have a long distance between my ears and my nose (i.e., narrow but long from front to back). It literally took me 40 years to figure out that if the arms of the glasses are not long enough, the glasses will tilt down, because the curve of the arm will sit on your ears. This results in really poor vision (as you can imagine). It sounds stupid that I never realised it, but hopefully I can spare someone else in a similar situation -- make sure the arms of the glasses are long enough!

[velosol]

Also might want to check out straight-armed glasses. Typically they'll have some roughness or rubber where they meet your ears to help stay on your head like some fancy sunglasses.

[KineticTroi]

BTW - These acetate frame arms can usually be heated carefully with a torch, and bent to straighten them up. Thus making them much longer. Sometimes you can even rebend them farther back. Though straighter arms are somewhat more prone to fall from your face.

[Cthulhu_]

Don't your glasses shops make sure to adjust the arms to your size? Mine does, they have a special device that heats up the arms so they can bend it carefully, and pliers to adjust the nose thingies.

[walterbell]

A bowl of hot water will usually work to bend acetate frames, but not plastic frames (which cannot be adjusted). Be sure to keep heat away from the lens/coating to avoid crazing.

[meej]

This data is not difficult to find at all. It's listed in the details section for every frame. You can also use it as a filter when browsing. Their stock at this size is really limited, however.

https://www.zennioptical.com/b/record.type-frame/_/N-1101494...

[wyclif]

You should look at Shuron. They don't have a fancy website but they do have great customer service and offer their frames in various measurements, and if you have a large head they have frames that will fit. You can order according to the eye size, bridge size, and TPL (temple size).

[selectodude]

There’s nothing wrong with going slightly upscale to Warby Parker with accurate measurements and some QC, especially if you have a more “demanding” Rx.

[DenisM]

Hinge-less frames can take any shape, so long as they are long enough they will fit you just fine.

[hoaw]

I think the overall experience is just okay. But since getting equvilent glasses (selection, coatings) can cost several hundred dollars it is worth it.

[ticmasta]

Good hack - I think I'll try this!

[traek]

> They are so cheap there is no reason not to do it this way.

Besides the environmental cost, maybe.

[dwaltrip]

Relative to other things like travel, commuting, home energy usage, electronics, etc, I'm guessing the environmental cost of a pair of glasses is very, very low.

It is important to focus on effective actions. For example, a lot of people think that somehow recycling affects climate change, which (AFAIK) is not true in any meaningful sense. That isn't to say one shouldn't recycle -- there are plenty of reasons to do so in many cases.

[giovani]

I think the broader point was that buying something only because it's cheap is generating unnecessary waste.

I'm not saying this is the case here because the original pair of glasses can still be used, but isn't avoiding this kind of behaviour a good thing?

[fwip]

I believe that recycling aluminum takes significantly less energy than smelting it in the first place.

I don't have any idea about plastics/papers.

[sitharus]

Post-consumer paper can be recycled in to some forms of low-density card that doesn't require high quality pulp. Egg cartons come to mind, and as a percentage in some packaging, newsprint and sanitary papers. Post-consumer paper cannot easily be recycled in to anything resembling printer paper due to the contaminants. Pre-consumer paper is recycled heavily as it's of known quality.

I'm not aware of any plastics that are recycled in to the same form. I know that PET (1) and HDPE (2) are recycled in to fibres.

It's a similar story to glass, certainly where I live a large amount of glass is recycled in to crushed aggregate rather than new bottles. The energy costs of cleaning don't make it worthwhile.

[samatman]

Glass bottles used to be reused, which is the responsible thing to do.

Consumers didn’t like it because scratches accumulate on the outside of the bottles.

[ConceptJunkie]

I always thought it was a shame that we stopped doing that, but plastic has taken over pretty much for all the glass bottles that used to be recycled.

[JJMcJ]

Aluminum is the only part of recycle that is really profitable. That's way people picking through trash take the cans and nothing else.

[kd0amg]

Everyone I've seen do this takes bottles too, and it's because they can redeem the bottles and cans to collect a state-mandated deposit.

[irrational]

Plus you can probably donate the glasses. There is probably some poor person out there with a prescription close to yours.

[soperj]

It helps the amount of garbage put into the environment, which is good regardless.

[dharmab]

I don't throw away my old glasses. I keep them in various places as backups, such as in car gloveboxes, in the home emergency kit, in a bag while traveling and so on.

[Baeocystin]

When I was younger I used to tease my Mom & Dad for essentially treating their reading glasses like pens or pencils, and letting them diffuse around the house as the acquired new pairs.

Now that I'm in my mid-40's, I take it all back. Having a pair, even if it isn't the exact right one, always with reach is a godsend.

[ghaff]

When I wear my contacts, I need reading glasses. I buy them essentially in bulk from Amazon and leave them scattered everywhere.

[bookofjoe]

Me too. I have around 10 pairs, so I never find myself in a room/place without them. I like Dr. Dean Edell’s for their combination of style/comfort/build quality/light weight. $9.99/pair

[3chelon]

Me too. Even though my eyesight continues to deteriorate, a pair of old prescription glasses is many times better than no glasses at all in an emergency!