[crankylinuxuser]

I'm not parent/GP...

I bought a ADALM-PLUTO from Arrow. $98 shipped. It's a SDR that goes from 325MHz-3.8GHz, and with a "hack" will go from 70 MHz to 6GHz. 7dBm (or 5 mW Tx).

You'll need amplifiers to go from 5mW to QRP (~1W). I did find one on Banggood for 1MHz-1GHz with up to 35dBm gain. I'll still need one for 2.4GHz and 5.8GHz, but that's a small price to pay for having nearly 6GHz of spectrum to read. ( https://www.banggood.com/1MHz-1000MHZ-35DB-3W-HF-VHF-UHF-FM-... )

[bitcoinmoney]

I also have an amateur license. How much is the cost to go to non voice band for starters??

[crankylinuxuser]

I'm not entirely sure I can competently answer that.

I know with my ADALM-PLUTO hardware, it can receive from 70MHz to 6GHz, but at only 5mW. So if you want to start Tx-ing, you'll need a low noise amplifier for the band you want to transmit. Also, the antennas are for 325MHz-3.8GHz and are anemic stubby 1dBi. You will want better antennas. Ideally, for the respective bands you want to do stuff with.

I'm still piecing my software together. Right now in open-source land, there's lots of individual decoders and some encoders. I'm having good luck with SDRangel for handling Tx as well - there's some weirdness with encoding data for Tx with the plugins. But that's just growing pains of this being new.

The other problem you'll have, if you just don't pony up kilobucks for "ham radio hardware", is that going from 7dBm (5mW) to 30dBm (1w) is going to be weirdly expensive. And then that only gets you to 'QRP'. You'll then need a second stage amp to go from 1w to higher power.

If you do EME digital modes, you're amping up from 5mW to 1.5KW . $$$$$$$$ lies here. But I'm sure if you talk in freenode IRC in ##hamradio , there are EME hams there.

So to better answer your question, rather than give you a bunch of options, here's a general idea of cost breakdown:

Cost = laptop + ADALM-PLUTO (or relevant SDR for HF) + 30 dBi amplifier for band you want + antennas for band you want

My laptop is $500 and is Dell precision m4800. 4 cores/8 threads, 32GB ram. $500 from ebay. ADALM-PLUTO is $98 shipped from Arrow. I bought 2 1.35GHz-9.5GHz antennas for $13 each from Banggood. I'm looking for a 7dBm->20dBm 2.4GHz amplifier That would bring me up to 100mW output. I also bought a random assortment of SMA connectors for $12

That would leave my current total at $136 for the wireless hardware, or $636 if you want a dedicated laptop. RasPis won't work with SDRangel - it eats CPU for breakfast, lunch, and dinner.

https://www.banggood.com/1_35GHz-9_5GHz-UWB-Ultra-Wideband-L...

https://www.banggood.com/18pcs-1_2G-5_8G-FPV-Telemetry-Anten...