[rukittenme]

I'm sorry I chose my words very poorly.

I said...

> Would attaching a heat sink to my shed cool it off?

What I meant to say...

> Would attaching a heat sink to my shed cool it below the ambient temperature?

To which the answer is obviously no.

A brief lesson on humidity to wrap up the discussion. The numbers I'm giving are bogus but the logic is sound.

Suppose you have a vessel of air at a temperature of 25C and a relative humidity of 90%. If I increase or decrease the temperature have I added or subtracted water from the system? No the water is constant. What will change in the relative humidity of the system.

Say I heat the vessel to 40C. The relative humidity will drop from 90% to 50%. Why? The air can hold more water. But say I reverse course and drop the temperature to 10C. Then the water begins to condense because the air can not physically hold the water any longer.

[/end-bogus-numbers]

So if we take MIT's device and try to extract water from the air we know two things. We need warm, humid air and we need to cool it until it condenses.

A heat sink will not cool the air below ambient. This is required for condensation. No configuration of heat sink + device will decrease the temperature unless we put some "work" into the system. That "work" will be electrical energy of some sort The source is irrelevant. It must be external to the system and it must have a cooling effect. We absolutely need some sort of peltier device (or other refrigeration technology). There is no way around it!

But to further illustrate the absurdity of all of this lets ask the following question. How much water can we reasonably expect to extract? After all 1 liter of air doesn't translate to 1 liter of water.

At 25C and 100% humidity air can hold about 0.02ml of water. Meaning for every one liter of water you need 50,000 liters of air. And suddenly you being to realize the magnitude of your problem. To extract 1 liter of water per day you would have to ram one liter of air through the system every second. And that's in an environment with 100% humidity! It's raining for god's sake! In the desert the amount of air needed will easily triple.

[OrganicMSG]

> A heat sink will not cool the air below ambient. This is required for condensation. No configuration of heat sink + device will decrease the temperature unless we put some "work" into the system.

A heat sink surrounded with foam with an opening left that looks down the focus of a satellite dish that has been carefully covered in tinfoil will get colder than ambient air temperature, if the dish is pointed at a clear sky.

[nkurz]

I'm not sure if you looked at the paper, but they take advantage of this phenomenon to lower the nighttime moisture collection temperature, and say it gives about a 3C benefit even without a satellite dish:

Operation in such arid regions also opens an interesting avenue for increasing water harvesting output with passive radiative cooling by leveraging the typically clear sky. The clear night sky and low vapour content in the atmosphere enables dissipation of long-wavelength (infrared) thermal radiation from the device to the cold sky to cool it below its ambient temperature. By facing the device to the sky during adsorption, a ~3 K temperature drop was achieved, which corresponds to an increase in 5–7% RH experienced by the adsorbent. This passive cooling can lead to opportunities to utilise other adsorbents that have their adsorption steps located beyond the typical levels of RH in specific regions.

https://www.nature.com/articles/s41467-018-03162-7

[cwkoss]

Why does the clearness of the sky matter?

Wouldn't cloud cover just cause the heat energy to be absorbed by the clouds or reflected back to a much larger area of the ground (so only a small percentage would return to the device itself)?

[nkurz]

I agree that the common explanation is confusing. If I understand it right, it's not the transparency of the sky to the outgoing radiation that matters, but the absence of a (relatiely) high temperature emitter like a cloud. The two are closely tied (if there is no absorber, then there is no emitter) but the "clear sky" explanation mixes up cause and effect.

Rather than emphasizing the transparency, a clearer explanation would emphasize the absence of a counterbalancing warm mass whose emissions can be absorbed. Objects are always losing energy by black body radiation, but normally are gaining thermal energy from their similarly temperatured environment. One a clear night, there is a greater imbalance.

[cwkoss]

Fascinating, thank you for the explanation

[cwkoss]

I understand why this works, but still feels like magic. Very cool.

[nkurz]

> Would attaching a heat sink to my shed cool it below the ambient temperature?

To which the answer is obviously no.

Except it's "yes" if you define "ambient temperature" as the temperature inside the shed on a sunny day, and if you put the radiating fins of the heatsink in the cooler outside air, which is the equivalent of what the paper does! You can criticize that this is a poor definition of ambient, but it is the one they use.

No configuration of heat sink + device will decrease the temperature unless we put some "work" into the system. That "work" will be electrical energy of some sort The source is irrelevant. It must be external to the system and it must have a cooling effect. We absolutely need some sort of peltier device (or other refrigeration technology). There is no way around it!

So when I take a shower and then and then see water condensing on the inside of my single pane bathroom window on a cold night, it means there's got to be a hidden Peltier cooler in there somewhere? Or in a more exact comparison, if I have an outdoor greenhouse on a cold but sunny day, and I see water condensing on the inside of the glazing, there's got to be a refrigerator making it happen? No, there just needs to be a temperature differential, and the heat sink acts like a cold window.

At 25C and 100% humidity air can hold about 0.02ml of water. Meaning for every one liter of water you need 50,000 liters of air.

By contrast, this is an appropriate criticism! Yeah, to collect a liter (1 kg) of water at 25C and 50% humidity, you'd need to extract all the water from 100,000 liters of air. And since you aren't going to get all the water out, you it probably needs to process several times that amount. Is this absurd? It probably depends on how much water you need. An Olympic Swimming Pool is 50m x 25m x 2m, so that amount air would give you something between 1 and 25 liters of water depending on your efficiency of extraction.

How do you get this much air over your collector? It looks like a medium bathroom fan (70 cubic feet per minute) seems to move a little over 100,000 liters per hour, so it could move this amount of air in a day. Alternatively, if you wanted to do it without power, you'd probably get more than this amount of air flow with a gentle breeze. Whether it's worth it would depend on how thirsty you are in that desert and what your other options are, but it's still a neat technique!

[rukittenme]

You're misunderstanding the point.

The world is ambient. Your device is not. You are trying to extract water from the world so your device needs to be lower than ambient.

> So when I take a shower and then and then see water condensing on the inside of my single pane bathroom window on a cold night, it means there's got to be a hidden Peltier cooler in there somewhere? Or in a more exact comparison, if I have an outdoor greenhouse on a cold but sunny day, and I see water condensing on the inside of the glazing, there's got to be a refrigerator making it happen? No, there just needs to be a temperature differential, and the heat sink acts like a cold window.

The hot, moist air from your shower should be considered ambient. Your window is colder than that ambient temperature. Hence the water condenses.

Let me explain further because this is clearly a sticking point.

The air your shower is generating is roughly 40C at 100% humidity. You don't have to put in any work to condense this water on the window because you already put work in to heat it.

"Ah ha!" you say. "They're heating the water vapor up inside the container! Just like my shower!" Except no the two are not equivalent. Heating up 25C air at 100% humidity to 40C would decrease its humidity. I.e. no condensation. Cooling 40C air at 100% humidity to 25C would result in condensation (your shower)! It is a one way process. The source of the water vapor MUST be hotter than the condenser! When your source is the atmosphere that means your condenser has to have a lower temperature than the exterior conditions.

> Except it's "yes" if you define "ambient temperature" as the temperature inside the shed on a sunny day

The temperature is higher in the shed but the humidity is lower! Lowering the temperature of the shed to the outside temperature will not produce condensation!

Edit: Sidenote. Greenhouses generate their own water vapor (transpiration). Their absolute humidity will be higher than the outside.

Edit2: I also want to emphasize that if you're adding water to the system you're doing it wrong. We're trying to harvest water not supply it. Showers and greenhouses are not apt comparisons.

[cwkoss]

I think you are thinking about this device as if it operates continuously. My understanding is that it 'consumes' the temperature gradient created by the day/night cycle.

Could mean that this would be ineffective in the tropics where the temperature between day and night varies less. And presumably the device may 'stop working' part way through the afternoon if the previous night was too warm relative to daytime temperature.