|
Ha, if you think filament is expensive NOW, just wait until you have an HP printer! That said, they do provide some interesting cost values which make it sound like this will probably be in the ballpark of low 6-figures: >1. Based on internal and third-party testing for HP Jet Fusion 580 and 5403D Printers, printing time is a fraction of the time of the printing times of comparable plastic fused deposition modeling (FDM), stereolithography (SLA), and material jetting solutions from $20,000 USD to $120,000 USD on market as of June, 2017. Testing variables for the HP JetFusion 580 3D Printer: Part quantity: 1 full build chamber of parts from HP Jet Fusion 3D at 10% of packing density versus same number of parts on above-mentioned competitive devices; Part size: 30 cm3; Layer thickness: .08 mm/0.003 inches. Competitor testing variables are comparable. >2. Based on internal testing and simulation, HP Jet Fusion 3D average printing time is up to 10 times faster than average printing time of comparable fused deposition modeling (FDM) and selective laser sintering (SLS) printer solutions from $100,000 USD to $300,000 USD on market as of April, 2016. Testing variables for the HP Jet Fusion 4210/4200/3200 Printing Solutions: Part quantity: 1 full build chamber of parts from HP Jet Fusion 3D at 20% of packing density versus same number of parts on above-mentioned competitive devices; Part size: 30 grams; Layer thickness: 0.08 mm/0.003 inches. >3. Based on internal testing and public data, HP Jet Fusion 3D average printing cost per part is half the average cost of comparable FDM & SLS printer solutions from $100,000 USD to $300,000 USD on market as of April, 2016. Cost analysis based on: standard solution configuration price, supplies price, and maintenance costs recommended by manufacturer. Cost criteria: printing 1 build chamber per day/5 days per week over 1 year of 30-gram parts at 10% packing density using HP 3D High Reusability PA 12 material, and the powder reusability ratio recommended by manufacturer. Based on internal testing and public data, HP Jet Fusion 3D 4210 Printing Solution average printing cost-per-part is 65% lower versus the average cost of comparable FDM and SLS printer solutions from $100,000 USD to $300,000 USD on market as of April, 2016 and is 50% lower versus the average cost of comparable SLS printer solutions for $300,000 USD to $450,000 USD. Cost analysis based on: standard solution configuration price, supplies price, and maintenance costs recommended by manufacturer. Cost criteria: printing 1.4 full build chambers of parts per day/5 days per week over 1 year of 30-gram parts at 10% packing density on fast print mode using HP 3D High Reusability PA 12 material, and the powder reusability ratio recommended by manufacturer. |