[bsilvereagle]

Once you have the asm of a program, you have 100% knowledge of it if you put the time in to learn& follow the assembly. Sure, it's not as easy as looking at the source, but you have the capability of fully understanding the program.

With a mechanical device, you don't know the dimensions on press fits, you don't know what the aluminum was heat treated to, you don't know the silica to aluminum ratio and how that affects thermal expansion, you don't know what lubricant was used, you don't know what blend the fiberglass insulation is, the list goes on and on. It's not possible to obtain 100% knowledge without the drawings. At best, you make assumptions about material processes, what a reasonable press fit would be, occasionally you can spark test to make a guess at material composition, etc.

There isn't a "holy grail" (1) mechanical equivalent to a hexdump where if you grind at it long enough you achieve 100% knowledge.

(1) Obtaining a complete set of original drawings is, but unlike a hexdump, you can't get the drawings from the finished product.

[khedoros1]

> Once you have the asm of a program, you have 100% knowledge of it if you put the time in to learn& follow the assembly.

You have all of the "what" (in an inconvenient format that will need tremendous effort to be useful for most things), but you're mostly guessing on the "why". Tons of information is discarded, and can't be retrieved. Just guessed at. This puts a good bit of distance between what you have access to in the theoretical sense and how useful it is in the practical sense.